§ 1-5-4. NON-RESIDENTIAL BULK REGULATIONS.


Latest version.
  • Table 5-4 illustrates the bulk requirements for all non-residential zoning districts.
    TABLE 5-4: NON-RESIDENTIAL BULK REGULATIONS
    USE TYPE4
    B-1 General
    B-2 Old West
    B-3 City Cen.
    B-4 Bus. Park
    B-5 Industrial
    PI Public/Inst.
    Minimum Lot Area1
    7,000 sf.
    5,000 sf.
    7,000 sf.
    15,000 sf.
    15,000 sf.
    15,000 sf.
    Minimum Lot Width2
    50 ft.
    50 ft.
    50 ft.
    75 ft.
    75 ft.
    75 ft.
    Maximum Residential Density3
    22 units/ac
    22 units/ac
    40 units/ac
    Not Applicable
    Not Applicable
    22 units/ac
    Minimum Lot Area per Dwelling Unit
    1,980 sf.
    1,980 sf.
    1,089 sf.
    Not Applicable
    Not Applicable
    1,980 sf.
    Minimum Front Setback (main structure)
    20 ft.
    0 ft.
    0 ft.
    20 ft.
    20 ft.
    20 ft.
    Minimum Front Setback (accessory structure)
    20 ft.
    20 ft.
    20 ft.
    20 ft.
    20 ft.
    20 ft.
    Minimum Interior Side Setback (accessory structure)
    10 ft.
    5 ft.
    5 ft.
    10 ft.
    10 ft.
    10 ft.
    Minimum Street Side Setback (all structures)
    10 ft.
    0 ft.
    0 ft.
    10 ft.
    10 ft.
    10 ft.
    Minimum Rear Setback (all structures)
    10 ft.
    5 ft.
    5 ft.
    10 ft.
    10 ft.
    10 ft.
    Minimum Front Setback (Parking)
    10 ft.
    10 ft.
    10 ft.
    10 ft.
    10 ft.
    10 ft.
    Maximum Size for Accessory Structure
    No limit
    No limit
    No limit
    No limit
    No limit
    No limit
    Maximum Height for Main Structure
    35 ft.
    35 ft.
    60 ft.
    35 ft.
    35 ft.
    35 ft.
    Maximum Height for Accessory Structures
    20 ft.
    20 ft.
    20 ft.
    35 ft.
    35 ft.
    35 ft.
    Footnotes from Table 5-4:
    1. Minimum lot area shall be calculated as net land area.
    2. Minimum lot width is the distance between side lot lines measured perpendicular to the lot depth at the front setback line. Minimum lot width measurement for flag lots shall be interpreted by the Zoning Administrator. Lot width, as measured at the front setback line, shall not be less than 25% of the lot depth, unless waived by the Zoning Administrator due to unique environmental or geographic conditions.
    3. Maximum density shall be calculated as the total number of dwelling units/net land area.
    4. In addition to the standards listed in Vol. II, Table 5-4 above, the following supplemental standards shall apply to Institutional and Business Zoning Districts.
    Fences and Walls: See Vol. II, § 1-6-3.
    Landscaping and Screening: See Vol. II, Article 1-8.
    Lighting and Illumination: See Vol. II, Article 1-10.
    Parking and Loading: See Vol. II, Article 1-7.
    Outdoor Storage: See Vol. II, § 1-6-9.
    Cargo Containers: See Vol. II, § 1-6-8.
    Solar Panels and Alternative Energy: See Vol. II, § 1-6-16.
    Visibility at Intersections: See Vol. II, § 1-6-13.
    Temporary Use and Structures: See Vol. II, § 1-6-23.
    Design Guidelines: See Vol. II, Article 1-13.
    (Ord. 1402, passed 5-6-2014)